Building a patio can give your yard new life. But before you decide, you need to know what it costs. Here’s a simple guide to patio prices in Columbus, Ohio.

Typical Cost Ranges

• Plain concrete. $4.42–$5.92 per sq ft for a 4″ reinforced slab.
• Stamped concrete. $9–$16 per sq ft for a reinforced slab HomeBlue.
• Sand-set pavers. $13–$16 per sq ft (includes base and bedding layer) HomeBlue.

What Affects Your Estimate

• Material. Stone and stamped concrete cost more than plain concrete.
• Size. Bigger patios lower the per-sq ft price but raise the total bill.
• Site prep. Uneven ground, drainage fixes, or old-patio removal add labor.
• Extras. Borders, patterns, seating walls, fire pits, and lighting all add to cost.

Other Costs to Know

• Demo. Tearing out an existing patio can add $1.20–$1.90 per sq ft HomeBlue.
• Permits. City fees vary. Always check Columbus-area permit costs.
• Finishing. Sealing, lighting, and nearby landscaping add a few hundred dollars more.

Best Time to Build

Spring and fall give you stable ground and more contractor availability. Winter work can delay the job if the ground freezes or it snows.

How Brothers Irrigation and Lighting Can Help

We give clear estimates up front. We handle site prep and permits. We pour or lay your patio. Then we add irrigation and lighting. Here’s how it works:

1. We visit your yard and talk materials.
2. We send a clear, written quote.
3. We prep the site and pull permits.
4. We install the patio.
5. We set up lighting and irrigation.
6. We show you how to care for your new patio.

FAQ

Q: What’s the cheapest patio option?
A: Plain concrete is the most budget-friendly at about $4.42–$5.92 per sq ft

Q: How long does a patio last?
A: With proper care, concrete and pavers can last 20 + years. Seal concrete every few years. Refill joints in pavers as needed.

Q: Do I need a permit?
A: Most patios under 200 sq ft don’t need a permit in Columbus. Anything larger usually does. Always verify with the city.

Q: Can I DIY?
A: You can, but labor costs are lower if you hire pros. DIY also adds time and risk of mistakes.

Q: How soon can I use it?
A: After install, wait 48–72 hours for concrete to cure before heavy use. Pavers are ready once the sand settles.

If you want a clear cost breakdown and a smooth build, call Brothers Irrigation and Lighting. We’ll help you plan—and stick to—your budget.